Your attic is in desperate need of insulation, but you’re wondering how spray foam insulation around recessed lights is going to work out.
You love the look of your recessed lights in your home, so you want to make sure you keep them in working order. That’s where can light insulation covers come in handy.
As the general manager here at RetroFoam of Michigan and the Professor of Foam on the YouTube series Foam University by RetroFoam, I understand why making those airtight recessed light covers is important, especially in preventing air leaks.
It’s our mission to educate homeowners, so I plan to break this down for you so you understand what recessed light covers are, how to make them airtight when adding attic flat insulation, and how you and your contractor can choose the right covers for your project.
Whether you call them recessed light covers or can light covers, basically if you have recessed lights in your ceiling the housing for the light is up in your attic.
When you add insulation to the attic floor, then you need to get a cover to protect that housing and the inside of your light structure.
Whenever spray foam is used, I always recommend using light caps. This keeps the insulation from coming through into the actual light housing. So, can you spray foam around recessed lights? Yes, you can, and here’s why you’ll want a cap.
Open cell spray foam expands a lot. So, if the foam is sprayed on the light housing, there is a chance it could work itself down in the light fixture and even the room below.
Another reason you want to use the covers is there is the possibility the light may not be rated to be in contact with insulation. You need airspace around the light structure to let the heat dissipate.
Now if you decide to use an insulation material like fiberglass or cellulose, even then I would recommend putting a light cap over it, even if the lights are rated to come into contact with insulation. This is because either material could work its way into the fixture of the light and could obstruct it.
Now let’s get into how to use airtight recessed light covers.
You now understand what recessed light covers are and why they’re a good idea, now let’s talk about installing the caps and spray foam around the recessed lights.
A lot of times you can get store-bought light caps, put them right over the housing, and spray around them. Other times your insulation contractor will want to make them out of drywall or something similar.
The spray foam can then be sprayed around and over the cap ensuring there won’t be any air leaks.
Another option, especially when using spray foam insulation, the contractor might even make a box out of spray foam and then spray right over it.
Light caps are usually inexpensive running around $20 a piece at home improvement stores, and they don’t take long for a contractor to add-in.
The added bonus of the light covers is if you go into your attic and you need to service those lights, they will be super easy to identify. You will be able to take the box off and service those lights as needed.
When it comes to choosing the right covers for your recessed lights, talk with your contractor to find work out what you both feel is best for your home.
Vented vs Unvented Attic: Which is Better?
How Much Money Can You Save By Insulating Your Attic?
Does Mold Remediation Need to Happen Before Spray Foam is Installed in the Attic?