You’re tired of the air you pay to heat and cool escaping through your cathedral ceiling, so you’re ready to have foam insulation installed.
You know that foam is going to fix your problems, but you’re unclear on how the installation is going to go. Don’t sweat it, we’ve got you covered.
RetroFoam of Michigan has helped thousands of homeowners with their comfort and energy efficiency needs. With this experience, we know exactly how to insulate your cathedral ceiling in a way that you don’t have to worry about air leakage anymore.
We strive to educate homeowners, so in our continued efforts to get you all of the information you need, we are going to explain installing spray foam as your cathedral ceiling insulation.
The best method to insulate a cathedral ceiling is with spray foam insulation.
The crew will cut panels and spray the foam.
While the installation process is somewhat invasive, spray foam insulation creates the air barrier you’re looking for to stop air leakage.
That doesn’t really specifically answer your question, so let’s really break this down.
Before the foam can be sprayed into the cavity, any existing insulation will need to be removed so the spray foam can adhere to the underside of the roof.
One- to two-foot strips would be cut through the middle of the stud cavities on either side of the peak. This way the installer can spray from the soffit up to the peak in each cavity.
Once the foam has been sprayed into the cavities, drywall is placed back over where the strips were cut and a rough patch of mud is spread over the seams.
Once the foam is sprayed into your cathedral ceiling, you’ll notice a difference in the comfort level of your home.
No more air leaking through the roof. No more high energy bills.
Your home works as an entire system, so taking the jump to air seal the entire building envelope can make a huge difference. If you want to learn more about the benefits of foam insulation for the rest of your home, check out the Learning Center on our website.