Your home is one of the biggest investments you will make in your life and where you will spend most of your time, so comfort needs to be a top priority.
Insulating your home using RetroFoam injection foam and Icynene spray foam can make a difference year-round, not only keeping you cool in the summer and warm in the winter, but also saving you money on your energy bills.
Not Every House is the Same
There are several factors that come into play that lead to the final cost for an entire home installation project. The size of the areas that need insulation is one of those factors. Not every home is the same, so the best way to get an exact amount will be to have an estimator come to your home.
But fear not, for the purpose of informing you of the process, we will use price ranges to help you get an idea of how much the project could cost you.
How Much Does it Cost to Insulate a House with Foam Insulation?
The cost to insulate an entire existing home with foam varies widely. The price range is from $8,000 all the way up to $20,000.
The size of the treated surface area is what makes that price range so vast. The size of your living space is not the considering factor.
There are several factors that determine how much it is going to cost to insulate an entire existing home, but the number one factor is size of the area to be insulated.
What Factors Determine the Total Cost of Spray Foam Insulation?
As mentioned above, the size of the area to be insulated is the number one factor. It is determined by the height of your walls, the pitch of your attic and the size of your crawl space, as well as how many stories your home has.
The second factor that greatly determines the cost of a whole home insulation project is the difficulty of the job. This breaks down to the kind of siding you have. Vinyl siding is very easy to work with, but brick siding tends to be more difficult.
Vinyl siding is the easiest to work with, while aluminum siding tends to be slightly more difficult. Vinyl siding is easy to pop off of the home to drill holes where the foam will be injected. The same applies for aluminum siding, although the process is slightly different. Once the foam is installed, the holes are filled with foam caps.
Brick siding is harder to work with and requires crews to drill into the mortar to get to a point where they can inject the foam. After the foam is injected and the cavities are full, then mortar must be used to fill in the holes that were drilled.
With all of these factors, a person who has a larger area to insulate along with brick siding will get a higher estimate than a person who has a smaller area to insulate with vinyl or aluminum siding.
Types of Insulation Product Offered
When an entire home is insulated with foam, there are two types of products used – RetroFoam injection foam and Icynene spray foam. Essentially it comes down to areas that are considered an open cavity or a closed cavity.
RetroFoam will be used throughout the house in any area that has closed cavities, such as walls and cathedral ceilings.
Icynene will be used in areas that are open cavities, including attics, crawl spaces and rim joists. There are two types of spray foam, open and closed cell which have different properties and application that can also impact the cost.
What Other Services are Offered in an Entire Home Insulation?
- Free estimate – An estimator comes to your home, takes measurements and looks for trouble areas, and then gives you a quote of how much the project will cost.
- Free concierge program – A concierge is assigned to each customer who will stay with them throughout the entire process. The concierge will know the project like the back of their hand.
- Help completing financing1 – For customers who are looking to get their project financed, an employee at the contractor’s office will help walk the customer through the process.
1 With approved credit. Call for details, 866-900-3626.
- Clean-up before the project – Almost every home has existing insulation in the attic that will need to be removed. The contractor should have a crew that comes out to the home and spends several hours removing the old insulation to prepare the space for spray foam.
- Clean-up after the project is complete – After the insulation job is completed, crews work to return the home to the way it looked before the project was started. This includes cleaning the siding and vacuuming up any foam on the ground.
- Rebates – Most customers get rebates from their energy provider. A good contractor will send those rebates in for the customer after the job is done.
- Lifetime warranty – The lifetime warranty is sent to the home owner after the project is completed. This warranty is valid for the life of the home and is transferable.
All of these above services should be included in the price of the project, so there are no added charges.
How Much Time Does it Takes to Insulate an Entire Existing Home?
An entire existing home insulation project takes approximately two days.
The first day is spent cleaning out existing insulation in the attic and preparing it for spray foam. This process takes about 4 to 6 hours.
On the second day the two crews show up in the morning ready to work. Spraying and injecting foam can range anywhere from 4 to 7 hours depending on the size of the job.
Additional Fees, Taxes and Costs
There are no additional fees or hidden costs once the job is completed. The estimate you sign and agree to is the final cost of the project.
Getting Started with a Free Estimate
When you are ready to schedule a free in-home estimate and live in Michigan’s lower peninsula give us a call at 866-900-3626, or fill out the form by clicking here. You can also check out our budget calculator to give you a rough idea of the cost of the project by clicking here.